J-H(ST)Hh EIB | MSR Installation Cable with Static Screen European Installation Bus Halogen-Free Version
Item descriptions
Application: | For the installation on and under plaster in dry, humid and wet rooms as well as outside (by protected installation) in Strongly and weak stream arrangements, as BUS cable as well as as a MSR cable in strong stream arrangements. The transference of measuring values, the application in the process data processing as well as the use in the area of the tax technology and control technology are the main areas of application of this cable. |
Construction: | 1.....solid bare copper 2.....core insulation of halogen-free copolymere 3.....layer of plastic foil 4.....static screen of plastic laminated aluminium foil with drain wire 5.....outer sheath of halogen-free copolymere, green or grey |
Information: | Cores twisted to starquads. |
Standards: | DIN VDE 0815 (core identification) DIN EN 60228 class 1 (construction) EIBA pecification |
Peak operating voltage | [V] | 300 | |
Temperature range | in motion | -5°C till +50°C | |
Conductor resistance | max. | [Ohm/km] | 73,2 |
Insulation resistance | min. | [MOhm/km] | 100 |
Mutal capacitance | at 800 Hz | [nF] max. | 100 |
Test voltage | Core / Core | [KV] 5min. | 1 |
Core and Screen on conductorsurface | [KV] 1min. | 4 | |
Flammability | standard | EN 50266-2-4 | |
IEC 60332-1 |
Number of pairs and nominal conductor diameter mm | Copper figure kg/km | Overall diameter appr. mm | Calorific potential kWh / m | Weight appr. kg / km |
2 x 2 x 0,8 | 20,16 | 8,5 | 0,22 | 60 |